Asbestos Yarn Manufacturers
 
 
   
Asbestos Yarn
Asbestos Rope
Asbestos Cloth
Asbestos Tape
Asbestos Lagging Rope (Soft)
Asbestos PTFE Packing
Asbestos Graphite Packing
Asbestos Self Lubricated Graphite Packing
Asbestos Millboard Sheet
Asbestos Brake Liner
  [ More ]
Teflon® is the registered
Trademark of E.I. DuPont, USA.
 
All other Trademarks used are
properties of their respective
owners.
 
Non-Asbestos Ceramic Millboard Sheet
 
We offer Non-Asbestos Millboard Sheet that is fabricated from selected clean, long non-asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These Ceramic millboards are known for its features such as heat and fire resistance and strength. Our non-asbestos millboards are perfect at temperatures up to 500°C (932`F) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400`C. These are also known for its features Such as withstanding vibratory and impact loads easily.

 
Available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.
 
Features:
High temperature tolerance
Strength
Can easily withstand vibratory and impact load
Available in various grades
Acid, sound and vermin-proof
Strong and flexible
Non-Asbestos millboard Sheet is packed into wooden crates of approx 110 kilogram
Number of sheets in one crate varies according to board thickness.
 
 
Hi-Temp is available as densely braided compression packings - square, round and rectangular - in sections from 5mm to 200mm, and in any length. Full fitting instructions are included.
 

Board thickness in MM

 No. of sheets per crate

3.0

30

4.0

25

5.0

20

6.0

15

10.0

9

12.0

7

 
The Non-Asbestos Ceramic Millboard Sheet offered by us find wide application in boiler and furnaces, catering equipment and steel, ferrous, , non-ferrous plants. Various uses are stated below:
 
Bedding layers on floor tiles in boiler house.
Refractory underlining
Damper control heat insulators
Boiler door linings
Gaskets for burners and ducting
Heating appliances such as Domestic, Cookers, and Grills
Flue gas and burner seals
Combustion chamber linings
Heat shield panels
Steel and Aluminium making processes
Centrifugal casting seals
Induction furnace coil protection
Splash guards
 
   
 
Home | Profile | Products | RESOURCES | Contact | Enquiry | Sitemap | Blog | Rss
 
Copy Right © 2013, All Right Reserved By Asbestos Centre