Non Asbestos Millboard Sheet Manufacturers
ALL PRODUCTS
We offer Non-Asbestos Millboard Sheet that is fabricated from selected clean, long non-asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These Ceramic millboards are known for its features such as heat and fire resistance and strength. Our non-asbestos millboards are perfect at temperatures up to 500°C (932`F) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400`C. These are also known for its features Such as withstanding vibratory and impact loads easily.
Available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.
Features:
- High temperature tolerance
Strength - Can easily withstand vibratory and impact load
- Available in various grades
- Acid, sound and vermin-proof
- Strong and flexible
Strength
Packing Method:
- Non-Asbestos millboard Sheet is packed into wooden crates of approx 110 kilogram
- Number of sheets in one crate varies according to board thickness.
How supplied:
Hi-Temp is available as densely braided compression packings – square, round and rectangular – in sections from 5mm to 200mm, and in any length. Full fitting instructions are included.
| Board thickness in MM | No. of sheets per crate |
3.0 | 30 |
4.0 | 25 |
5.0 | 20 |
6.0 | 15 |
10.0 | 9 |
12.0 | 7 |